Skip to main content
Hybrid solar plant with grid connection and battery backup

Capacity: 1 KW to 10 KW

Hybrid solar systems combine grid connectivity with battery backup, giving you daytime solar savings along with power during outages. Smart power management switches intelligently between solar, battery and grid based on availability.

  • Solar plus battery backup with grid support
  • Backup during power cuts
  • Suitable for homes, offices, shops, schools and clinics
  • Custom battery configuration based on backup needs

Define essential loads and backup duration

Write down which circuits must remain powered and their running and starting demands. A hybrid inverter’s rating and usable battery energy constrain backup; the solar capacity alone does not establish runtime.

Confirm battery compatibility, isolation, safety requirements and permitted export separately. Request a written design rather than a blanket whole-building backup promise.

Discuss your requirement

Specify what must stay on during an outage

List essential appliances or circuits, their running power, starting demand and required duration. The inverter output limits instantaneous load; usable battery energy limits how long the selected loads can run.

A system can therefore have adequate solar generation capacity but insufficient backup output or stored energy. These are separate decisions in the proposal.

Storage compatibility and operating limits

The inverter and battery must support the intended voltage, chemistry, control communication and operating conditions. Confirm manufacturer-approved combinations and the placement requirements.

Battery cycling, temperature, permitted usable depth and conversion losses affect service and runtime. Request the applicable warranty and maintenance documents rather than a general promise of uninterrupted whole-house power.

Separate grid export from backup operation

Battery capability does not itself authorise export to the utility. The equipment, connection and operating arrangement must follow the applicable approval process.

Ask for clearly identified backup circuits, the operating/isolating method and commissioning instructions. The electrical design should be reviewed by qualified personnel.

Explore energy and backup assumptions · Compare inverter types · Check quotation scope

Clear answers

Frequently asked questions

What is a hybrid solar system?

A hybrid system combines solar generation with a compatible inverter and battery arrangement, and can include grid support according to its design.

Does hybrid solar guarantee power for the whole building?

No. Backup is limited by inverter output, battery energy and the circuits selected for backup. Heavy loads need a separate design assessment.

How is battery capacity selected?

List essential loads, their power draw and required backup duration. Include usable battery limits, conversion losses and manufacturer operating requirements.

Can hybrid solar export to the grid?

Only if the inverter, approvals and metering arrangement permit it. Battery capability alone does not authorise grid export.

Can I use an existing inverter battery?

Compatibility depends on battery chemistry, voltage, control communication and the inverter specification. Ask a qualified designer to verify it.

Is hybrid solar more complex than on-grid solar?

Storage adds controls, protection, battery placement and maintenance requirements. Compare these against the value of backup for your property.

Can solar charge batteries during a power cut?

A suitably designed hybrid system may support this, subject to inverter capability, available sunlight and battery operating limits.

What affects hybrid solar pricing?

The solar array, inverter rating, battery usable capacity, backup circuits and installation protections are major cost factors.

Will battery backup last all night?

Only if available usable battery energy is sufficient for the selected loads and duration. No overnight duration is guaranteed without a load calculation.

Does every battery system qualify for subsidy?

Do not assume battery costs or a hybrid configuration qualify. Confirm the permitted system and eligible components through the applicable scheme process.

Where should batteries be installed?

Follow manufacturer requirements for temperature, ventilation, access and protection. The final location should be assessed by a qualified installer.

How can I request a hybrid proposal?

Share your location, electricity bills, essential appliances and required backup duration. Confirm equipment compatibility and service availability with ARISE.